Capsule Slip Ring SRC012-24S
Ordering Model Information

Dimensional Drawings
SRC012 Series / No Orchid
SRC012 Series / C-Type Flange

List of Standard Models
| model | Number of lines (cores) | Maximum current per channel | Conductor specifications | Length L (mm) |
| SRC012-6 | 6 | 1.5A | Silver-plated Teflon AWG 30# | 14 |
| SRC012-12 | 12 | 1.5A | Silver-plated Teflon AWG 30# | 19.5 |
| SRC012-6 | 3 | 1.5A | Silver-plated Teflon AWG 30# | 14 |
| SRC012-12 | 12 | 1.5A | Silver-plated Teflon AWG 30# | 19.5 |
| SRC012-18 | 18 | 1.5A | Silver-plated Teflon AWG 30# | 23 |
Technical Specifications
| Mechanical technical specifications | Electrical technical specifications | |||
| parameter | Numerical value | parameter | Numerical value | |
| Service life | Reference value for 10 million revolutions per minute (depending on working conditions) | Power | Signal | |
| Rated speed | 150 rpm | Rated voltage | 0~240VAC/VDC | 0~240VAC/VDC |
| Operating temperature | -30°C~-80°C | Insulation resistance | ≥300MΩ/300VDC | ≥300MΩ/300VDC |
| Operating humidity | 0~85%RH | Conductor specifications | Reference Selection Table | Reference Selection Table |
| Contact material | Gold/Gold | Conductor length | Standard length 300mm (customizable) | |
| Housing material | Engineering plastics | Dielectric strength | 300VAC@50Hz,60S | |
| Rotational torque | 0.05 N·m + 0.02 N·m / 6 channels | Dynamic resistance variation | <0.01Ω | |
| Protection rating | IP51 | |||
Wire Color Code Table for Each Circuit
| Loop | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| Color | Black | Red | Yellow | Green | Blue | White | Black | Red | Yellow | Green | Blue | White |
| Loop | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 |
| Color code | Black | Red | Yellow | Green | Blue | White | Black | Red | Yellow | Green | Blue | White |
Note: Ring code 1 refers to the first wire, counting from the rotor end toward the stator end. For example, the color sequence for the SRC125A-06 is black, brown, red, orange, yellow, and green. These 24 wires constitute a single color group; if the total number of output wires exceeds 24, the color group repeats, and number markers are used for identification.




